What is the opinion of Reddit about the
ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers (DUROCK V1 Smokey 60/87 Keyboard Set)?

Here are some Durock stabs on amazon. I’ve already used them in 2 builds, they’re great

I would try more dielectric grease which may help with it. But the long term solution/permanent fix would be to get better screw-in stabilizers. Since your are currently using pcb mount clip ins, your pcb should support screw-in stabs as well. This is pretty easy if you have a hotswap board but quite a hassle if your board is soldered

Durock stabilizers are available on amazon

sorry for all the questions just one more thing, I saw these zug gear stabs and wanted to see if their any good or better than the durocks ZugGear Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers (Smokey 60/87 Keyboard Set) https://www.amazon.com/dp/B0888932PV/ref=cm_sw_r_cp_api_i_FKdxFbDEBAZ8Q

Great choices! The only thing I would change is get some Durock stabilizers instead. They are 100% worth it and arrive at amazon speed (It says ZugGear, but it’s durock). PBT caps are king! Welcome to the hobby :]

Try this. I used these with lube and they work well for me.

I really like these screw in stabs: https://www.amazon.com/ZugGear-Transparent-Stabilizers-Mechanical-Satellite/dp/B0888932PV?th=1

When lubing the stabs you can either use dielectric grease + switch lube like krytox 205g0 or just switch lube. Switch lube is expensive so I use a combination. I use krytox 2050g0 for just the plastic housings and then dielectric grease for the actual stem.

This the grease I use: https://www.amazon.com/gp/product/B000AL2RI2/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

For switches I would recommend lubing them yourself. It’s a good learning experience and it’ll help you in the future. The trickiest part of keyboards IMO is finding a switch for you. It took me many months to find my “endgame” switch. Buying sample packs/sets may help.

I just finished building my first build, everything is fantastic but one side of my spacebar is super rattly, the right side. Is there anyway to fix this without taking apart my build?

​

The stabs are here,

https://www.amazon.com/ZugGear-Transparent-Stabilizers-Mechanical-Satellite/dp/B0888932PV?th=1

These are durock stabs.

But if you would rather not use amazon then you could get these.

Are these ZugGear stabs sold by Durock Direct on Amazon legit Durock stabs?