A total of 18 reviews of this product on Reddit.
·
Thanks for the feedback! funnily enough I, this is also the white LED varient, it’s just the lighting that gives it that blue look. The keycaps used are a cheap no name brand that can be found almost anywhere, the place I bought them from was Amazon, but that can also be found on eBay and AliExpress. Here’s a link to the page I bought mine from: https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=mp_s_a_1_1?ie=UTF8&qid=1540665689&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Happy+Balls&dpPl=1&dpID=51liQTeB0JL&ref=plSrch
Glad you like it.
·
Ordered this set from Amazon for my Pok3r: PBT Keycaps Backlit 109Key Set… https://www.amazon.com/dp/B077Q75JZ4?ref=ppx_pop_mob_ap_share
Everything is great but the space bar pops off the stabilizer on the opposite side where it’s pressed. Doesn’t happen with stock Vortex caps. Is there anything I can do or did I get a poorly made space bar keycap?
·
I just put these on my full size Alloy
I think they look great!
·
Logitech G610 Orion Red KB
I’ve just purchased a full keycap set in doubleshot PBT cherry. I am very happy with the look and feel of the caps, although the some of the caps don’t fit
*capslock
*spacebar (6u)
*right shift key (fits spacing but not the stabalizers)
*both control caps don’t fit (1.5u CTRLs (2))
I don’t know what I should do, as the price of the set was VERY reasonable, but everything just doesn’t match. Is there some way I can get individual keycaps?
Link to product I purchased on Amazon
·
It was just some random ones I found on amazon.
·
This is the kit I have. As /u/qbism_ mentioned, it’s an inexpensive kit from Amazon.
·
This is a Magicforce 68 /w Happy balls pbt keys, both from amazon
https://www.amazon.com/gp/product/B077Q75JZ4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B072M53N2D/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
·
Yes! $30 PBTs from Amazon. They’re not amazing, but like I said, better than stock by far.
https://www.amazon.com/dp/B077Q75JZ4/ref=cm_sw_r_cp_apa_i_Mv1uCbRW7QQJF
·
This is what I would do:
Buy a white ice GMMK Full sized keyboard: https://www.pcgamingrace.com/products/the-glorious-gmmk-full-size-pre-built-white
It looks like the board comes prebuilt with gat browns, which are a tactile switch, so not quite as loud as blue switches. You can try to contact GMMK and see if they will swap them. If not and if blue are a must: https://www.pcgamingrace.com/products/gateron-switches
The keycaps that come with the GMMK don’t quite fit your criteria. These are an option if you want: https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=sr_1_2_sspa?dchild=1&keywords=white+and+grey+keycaps&qid=1610347386&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyN0tOMlM2SFRTQ0lDJm…
·
Oh dear. That was my first build and tbh I don’t think I can find everything but I’ll do my best. It also has undergone 2 LED swaps, spring swaps and a couple of other keycap sets.
- Base kit, including switches, plate, case, stabilizers, PCB here: https://mechboards.co.uk/shop/kits/60-diy-kit/
- Case: titanium grey (iirc)
- Switches: Gateron clears (with a caveat, see lower)
- PCB: GH60 Satan
- Replaced most of my switch springs with 45g or 60g springs that I can’t remember where the hell I bought them.
- LEDs are standard 3mm through-hole warm white LEDs, which I bought at a local shop. They’re really not hard to find online, though prices vary a lot.
- USB cable from here: https://mechbox.co.uk/collections/usb-cables-1/products/coiled-lindy-mini-usb-cable?variant=11842113208362
- Keycap set is the same as this one: https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4 but I can’t remember where exactly I bought it from.
- Enter key is one I got for free with my old Ducky One but I think can still be purchased separately, see: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=3055
Tell me if I missed anything. It was pretty easy to build, though I did have prior experience with soldering. I also put a layer of felt at the bottom of the case for some minor noise management.
Building a kit is usually very straightforward as there’s a lot of resources online on how to assemble stabs and solder switches, and using a kit means you don’t have to worry about part compatibility.
I do, however, have issues with the screws that are clearly cheapo screws that can’t handle repeated disassembly-reassembly so I had to toss a few away already. I still need replacement screws as I think only or 3 are holding the damn thing together at this point. But they weren’t made to go through everythign I put this poor board though so there’s that. xD
·
I just grabbed them off Amazon (https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4?th=1) on impulse to try them out as I was getting tired of the Deck font. They seem quite decent for $30. The default LED brightness on the Hassium is a bit much and shines through the white keys pretty bad, but I just modified my default LED script to tone things down a bit.
·
I got them from Amazon – https://www.amazon.com.au/dp/B077Q75JZ4/ref=cm_sw_r_cp_api_fab_7NpGFb2Y0KR66
·
Some Nintendo style ones, here I’ll just send the amazon link : https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4?ref_=fsclp_pl_dp_2
·
Cheap brand from Amazon, have held up super well though! https://www.amazon.com/Keycaps-Doubleshot-Switches-Mechanical-Keyboard/dp/B077Q75JZ4/ref=mp_s_a_1_11?keywords=pbt+keycaps&qid=1558230032&s=gateway&sr=8-11
·
> https://www.amazon.com/dp/B077Q75JZ4?ref=yo_pop_ma_swf
those look nice, thanks!
·
It’s a standard layout, so any mx keycap set would work great
I bought this one on Amazon
PBT Keycaps Backlit 108Key Set
https://www.amazon.com/dp/B077Q75JZ4?ref=yo_pop_ma_swf
·
PBT Keycaps Backlit 109Key Set Doubleshot Translucent Cherry MX Key Caps Top Print with Keycaps Puller for 87/104/108 MX Switches Mechanical Gaming Ke https://www.amazon.com/dp/B077Q75JZ4/ref=cm_sw_r_cp_apap_fvgCJvecohJca
